Skip to main content

My Lumatone's Firmware Update Did Not Complete

Maybe your computer crashed during a firmware update, or you accidentally unplugged your Lumatone. In most cases it's nothing to worry about, and nothing is lost.

D
Written by Dylan Horvath

If your Lumatone is stuck showing the rainbow and Lumatone Editor says "No answer"

If the update was interrupted, the keys can keep cycling through the rainbow, and Lumatone Editor connects only as far as "No answer". The Settings button then stays greyed out, so you can't re-run the update yourself.

Your Lumatone isn't damaged, and your presets and calibration are safe. The unfinished update just needs to be cleared out, which we can do over the USB cable in about 20 minutes. Contact us using the chat button below and ask for a person, or email support@lumatone.io. Please include:

  • your Lumatone's serial number (on the underside);

  • whether you use a Mac or Windows;

  • the firmware version you were updating to.

In the meantime, there's no need to keep restarting it or to recalibrate the keys; neither will help. Switching it off and on won't harm it.

If Lumatone Editor connects normally

Did Lumatone Editor crash in the middle of a firmware update? Did you accidentally disconnect your Lumatone from your computer? Never fear.

First off, there's a good chance your firmware update completed itself as intended. To find out, connect your Lumatone and start up Lumatone Editor. Click the Settings button in the bottom right of the application, and you should see your current firmware version listed like this:

If the listed version matches the latest version found on our software page, congratulations! Your Lumatone managed to finish updating itself even though things went a little sideways during the update.

If the version is still the old one, this means that the update didn't complete as intended. At that point, run through the firmware update process again.

If the update still doesn't complete after a second try, contact us via the chat button below and ask for a person. Screenshots of what Lumatone Editor shows help us a lot.

Did this answer your question?