Skip to main content

Firmware update fails with a "communication error" on a Mac

If the update stops with a communication error, here's how to get it working.

D
Written by Dylan Horvath

Lumatone Editor sends firmware to your Lumatone over its USB cable, using a small network connection that your computer sets up automatically when the keyboard is plugged in. If that connection isn't working, the update stops after a moment with a "communication error".

1. Check the basics

  • Connect the Lumatone directly to your Mac with a USB cable, not through a hub or a MIDI interface. Firmware can only be sent over USB.

  • Switch the Lumatone on and wait about 2 minutes before starting the update.

  • Use the latest Lumatone Editor from our software page.

2. Check your Mac can see the Lumatone's connection

Open System Settings > Network (on older macOS, System Preferences > Network) while the Lumatone is plugged in and switched on. You should see an extra connection, named Lumatone or BeagleBone. If it's missing, try a different USB cable or port and switch the Lumatone off and on again.

3. If you're on macOS Catalina (10.15) or older

Some older versions of macOS, Catalina in particular, don't set up this connection properly. The simplest fix is to run the update from a different computer: a Windows 10 or 11 PC, or a Mac with a newer version of macOS. Install Lumatone Editor there, connect your Lumatone and run the update. Your presets and calibration stay on the keyboard, so nothing needs copying over.

Still stuck? Contact us using the chat button below and ask for a person. Tell us your macOS version and include a screenshot of the error. We can also help complete the update with you on a video call.

Did this answer your question?